Typical uses of the find command

Typical uses
find / -newer file -print	To print the name of all files with modification date later than given file
find . -type f -perm +111	To print the name of all executable files within the current directory and its subdirectories

Options for find command

Options and tests
-daystart	Measure times (for -amin, -atime, -cmin, -ctime, -mmin and -mtime) from the beginning of today rather than from 24 hours ago.
-depth	Process each directory's contents before the directory itself.
-follow	Dereference symbolic links. Implies -noleaf.
-help or --help	Print a summary of the command-line usage of find and exit.
-maxdepth levels	Descend at most levels (a non-negative integer) levels of directories below the command line arguments. -maxdepth 0 means only apply the tests and actions to the command line arguments.
-mindepth levels	Do not apply any tests or actions at levels less than levels (a non-negative integer). -mindepth 1 means process all files except the command line arguments.
-mount	Don't descend directories on other filesystems. An alternate name for -xdev, for compatibility with some other versions of find.
-noleaf	Do not optimize by assuming that directories contain 2 fewer subdirectories than their hard link count. This option is needed when searching filesystems that do not follow the Unix directory-link convention, such as CD-ROM or MS-DOS filesystems or AFS volume mount points. Each directory on a normal Unix filesystem has at least 2 hard links: its name and its . entry. Additionally, its subdirectories (if any) each have a .. entry linked to that directory. When find is examining a directory, after it has stat-ed 2 fewer subdirectories than the directory's link count, it knows that the rest of the entries in the directory are non-directories (leaf' files in the directory tree). If only the files' names need to be examined, there is no need to stat them; this gives a significant increase in search speed.
-version or --version	Print the find version number and exit.
-xdev	Don't descend directories on other filesystems.
Tests
Numeric arguments can be specified as	+n for greater than n -n for less than n n for exactly n
-amin n	File was last accessed n minutes ago.
-anewer file	File was last accessed more recently than file was modified. -anewer is affected by -follow only if -follow comes before -anewer on the command line.
-atime n	File was last accessed n*24 hours ago.
-cmin n	File's status was last changed n minutes ago.
-cnewer file	File's status was last changed more recently than file was modified. -cnewer is affected by -follow only if -follow comes before -cnewer on the command line.
-ctime n	File's status was last changed n*24 hours ago.
-empty	File is empty and is either a regular file or a directory.
-false	Always false.
-fstype type	File is on a filesystem of type type. The valid filesystem types vary among different versions of Unix; an incomplete list of filesystem types that are accepted on some version of Unix or another is: ufs, 4.2, 4.3, nfs, tmp, mfs, S51K, S52K. You can use -printf with the %F directive to see the types of your filesystems.
-gid n	File's numeric group ID is n.
-group gname	File belongs to group gname (numeric group ID allowed).
-ilname pattern	Like -lname, but the match is case insensitive.
-iname pattern	Like -name, but the match is case insensitive. For example, the patterns fo* and F?? match the file names Foo, FOO, foo, fOo, etc.
-inum n	File has inode number n.
-ipath pattern	Like -path, but the match is case insensitive.
-iregex pattern	Like -regex, but the match is case insensitive.
-links n	File has n links.
-lname pattern	File is a symbolic link whose contents match shell pattern pattern. The meta-characters do not treat / or . specially.
-mmin n	File's data was last modified n minutes ago.
-mtime n	File's data was last modified n*24 hours ago.
-name pattern	Base of file name (the path with the leading directories removed) matches shell pattern pattern. The meta-characters (*, ?, and []) do not match a . at the start of the base name. To ignore a directory and the files under it, use -prune ; see an example in the description of -path.
-newer file	File was modified more recently than file. -newer is affected by -follow only if -follow comes before -newer on the command line.
-nouser	No user corresponds to file's numeric user ID.
-nogroup	No group corresponds to file's numeric group ID.
-path pattern	File name matches shell pattern pattern. The meta-characters do not treat / or . specially; so, for example, find . -path './sr*sc' will print an entry for a directory called './src/misc' (if one exists). To ignore a whole directory tree, use -prune rather than checking every file in the tree. For example, to skip the directory src/emacs and all files and directories under it, and print the names of the other files found, do something like this: find . -path './src/emacs' -prune -o -print
-perm mode	File's permission bits are exactly mode (octal or symbolic). Symbolic modes use mode 0 as a point of departure.
-perm -mode	All of the permission bits mode are set for the file.
-perm +mode	Any of the permission bits mode are set for the file.
-regex pattern	File name matches regular expression pattern. This is a match on the whole path, not a search. For example, to match a file named ./fubar3, you can use the regular expression .*bar. or .*b.*3, but not b.*r3.
-size n[bckw]	File uses n units of space. The units are 512-byte blocks by default or if b follows n, bytes if c follows n, kilobytes if k follows n, or 2-byte words if w follows n. The size does not count indirect blocks, but it does count blocks in sparse files that are not actually allocated.
-true	Always true.
-type c	File is of type c: b block (buffered) special c character (unbuffered) special d directory p named pipe (FIFO) f regular file l symbolic link s socket
-uid n	File's numeric user ID is n.
-used n	File was last accessed n days after its status was last changed.
-user uname	File is owned by user uname (numeric user ID allowed).
-xtype c	The same as -type unless the file is a symbolic link. For symbolic links: if -follow has not been given, true if the file is a link to a file of type c; if -follow has been given, true if c is l. In other words, for symbolic links, -xtype checks the type of the file that -type does not check.
Actions
-exec command ;	Execute command; true if 0 status is returned. All following arguments to find are taken to be arguments to the command until an argument consisting of ; is encountered. The string {} is replaced by the current file name being processed everywhere it occurs in the arguments to the command, not just in arguments where it is alone, as in some versions of find. Both of these constructions might need to be escaped (with a \) or quoted to protect them from expansion by the shell. The command is executed in the starting directory.
-fls file	True; like -ls but write to file like -fprint.
-fprint file	True; print the full file name into file file. If file does not exist when find is run, it is created; if it does exist, it is truncated. The file names /dev/stdout and /dev/stderr are handled specially; they refer to the standard output and standard error output, respectively.
-fprint0 file	True; like -print0 but write to file like -fprint.
-fprintf file format	True; like -printf but write to file like -fprint.
-ok command ;	Like -exec but ask the user first (on the standard input); if the response does not start with y or Y, do not run the command, and return false.
-print	True; print the full file name on the standard output, followed by a newline.
-print0	True; print the full file name on the standard output, followed by a null character. This allows file names that contain newlines to be correctly interpreted by programs that process the find output.
-printf format	True; print format on the standard output, interpreting \ escapes and % directives. Field widths and precisions can be specified as with the printf C function. Unlike -print, -printf does not add a newline at the end of the string. The escapes and directives are: Escapes and directives \a Alarm bell. \b Backspace. \c Stop printing from this format immediately and flush the output. \f Form feed. \n Newline. \r Carriage return. \t Horizontal tab. \v Vertical tab. \\ A literal backslash (\). A \ character followed by any other character is treated as an ordinary character, so they both are printed. %% A literal percent sign. %a File's last access time in the format returned by the C ctime function. %Ak File's last access time in the format specified by k, which is either @ or a directive for the C strftime function. The possible values for k are listed below; some of them might not be available on all systems, due to differences in strftime between systems. Format specifiers @ seconds since Jan. 1, 1970, 00:00 GMT. Time fields H hour (00..23) I hour (01..12) k hour ( 0..23) l hour ( 1..12) M minute (00..59) p locale's AM or PM r time, 12-hour (hh:mm:ss [AP]M) S second (00..61) T time, 24-hour (hh:mm:ss) X locale's time representation (H:M:S) Z time zone (e.g., EDT), or nothing if no time zone is determinable Date fields a locale's abbreviated weekday name (Sun..Sat) A locale's full weekday name, variable length (Sunday..Saturday) b locale's abbreviated month name (Jan..Dec) B locale's full month name, variable length (January..December) c locale's date and time (Sat Nov 04 12:02:33 EST 1989) d day of month (01..31) D date (mm/dd/yy) h same as b j day of year (001..366) m month (01..12) U week number of year with Sunday as first day of week (00..53) w day of week (0..6) W week number of year with Monday as first day of week (00..53) x locale's date representation (mm/dd/yy) y last two digits of year (00..99) Y year (1970...) %b File's size in 512-byte blocks (rounded up). %c File's last status change time in the format returned by the C ctime function. %Ck File's last status change time in the format specified by k, which is the same as for %A. %d File's depth in the directory tree; 0 means the file is a command line argument. %f File's name with any leading directories removed (only the last element). %F Type of the filesystem the file is on; this value can be used for -fstype. %g File's group name, or numeric group ID if the group has no name. %G File's numeric group ID. %h Leading directories of file's name (all but the last element). %H Command line argument under which file was found. %i File's inode number (in decimal). %k File's size in 1K blocks (rounded up). %l Object of symbolic link (empty string if file is not a symbolic link). %m File's permission bits (in octal). %n Number of hard links to file. %p File's name. %P File's name with the name of the command line argument under which it was found removed. %s File's size in bytes. %t File's last modification time in the format returned by the C ctime function. %Tk File's last modification time in the format specified by k, which is the same as for %A. %u File's user name, or numeric user ID if the user has no name. %U File's numeric user ID. %... A % character followed by any other character is discarded (but the other character is printed).
-prune	If -depth is not given, true; do not descend the current directory. If -depth is given, false; no effect.
-ls	True; list current file in ls -dils format on standard output. The block counts are of 1K blocks, unless the environment variable POSIXLY_CORRECT is set, in which case 512-byte blocks are used.
Operators - Listed in order of decreasing precedence
( expr )	Force precedence.
! expr	True if expr is false.
-not expr	Same as ! expr.
expr1 expr2	And (implied); expr2 is not evaluated if expr1 is false.
expr1 -a expr2	Same as expr1 expr2.
expr1 -and expr2	Same as expr1 expr2.
expr1 -o expr2	Or; expr2 is not evaluated if expr1 is true.
expr1 -or expr2	Same as expr1 -o expr2.
expr1 , expr2	List; both expr1 and expr2 are always evaluated. The value of expr1 is discarded; the value of the list is the value of expr2.